How we do Buffing and Metal Polishing Services

 

Many people ask many questions about how we perform Metal Polishing Services to parts and get everything so much to a Chrome - Like Mirror Finish? We can perform Metal Polishing to many different metals such as Aluminum, Steel, Mild Steel, Titanium, Brass, Silver and other Metals too. Lets look into what really goes on when Polishing all these different kinds of Metals to a Mirror Finish.

 

• TAKE DELIVERY

First we here at Mirror Finish Polishing take delivery of customer parts sent from all over the world. These customers send us their motorcycle parts, car parts, guns, etc to be Polished to a Chrome - Like Mirror finish.

 

• LOOK OVER ALL CUSTOMER PARTS

After taking delivery we very carefully set everything out looking over the metal to see if it has any deep scratches, suface scratches in the metal and we see if the metal is aluminum, stainless steel, titanium, brass, etc. Depending on the type of metal the buffing wheels that we pick out may be different.

 

• CHECK TO SEE IF CUSTOMER HAS SPECIAL REQUESTS

The customers parts are now checked over, so we look up their order and find out if they are going to need any custom modifications done to their metal polishing order. If there are any custom modifications that need to be performed now is the time to take care of those because polishing metal is a lot easier when you only have to do it once.

 

• METAL CUTTING PHASE

Now we need to check to make sure if we need to cut any protrusions off of the metal and we need to be sure to do this before the grinding phase as the grinding phase is more of a "rough smooth" phase. Cutting the metal is not considered a "smooth" phase at all, so this needs to be performed before the grinding.

 

• GRINDING PHASE

Now would be the first phase of polishing the metal if you will, or better known as custom grinding. This process is only done to the metal if need be as you definitely would not want to grind anything away if it was un-necessary. We will custom grind off anything that needs to be taken off of the customers part as the customer requested.

18" Chevy ZR-1 Corvette Wheel During Pre-Polishing "Rough" Stages

• METAL SURFACING PHASE

This is the phase to get all the metal smoothed out after all of the grinding, cutting or maybe if the metal if very rough it will need to be smoothed out with a very coarse sand paper. Sanding the metal in a manner that is quick at all is going to require the use of sanding machines with special discs setup on the machines. Very careful attention needs to be paid to make sure all of the metal is perfectly smooth because if the metal is not smooth enough when you are finished with this stage then when you go to polish the metal later on it will show up very quickly.

 

• METAL SURFACING PHASE 2

Now that the metal surfacing of phase 1 is over we now have to get into Phase 2 which involves getting the very coarse grit just a little finer to get all of the deeper scratches out from Phase 1. This step is just as important as Phase 1 because if you go to the next step just a little too soon there will be a lot of time wasted and unless you want a bad metal polishing job then you are going to have to start all over again which will waste a lot of time and energy!

One of many Metal Polishing / Buffing machines here at Mirror Finish Polishing

• POLISHING METAL PHASE

Now we are ready to start the early stages of polishing the metal. Remember what was said earlier about knowing what type of metal you are working with? Well this is where you really need to know this information depending on if you are doing aluminum polishing, stainless steel polishing, steel polishing, titanium polishing or performing polishing to any other type of metal will change what polishing wheel you will be using. When you get to this stage before starting you need to make sure all of the scratches are out from the Metal Surfacing Phase 2 because if not that will make this stage twice as difficult to do.

 

• POLISHING METAL PHASE 2

After you are finished up polishing the metal in Phase 1 this Phase will be just as difficult as the other Phase and probably more difficult in most cases. Before you even begin on Phase 2 though you need to make sure all the surface areas of the metal are uniform because if not that will make this stage so much more difficult. Be sure to have a good machine that can have a lot of pressure put on it for long periods of time. You will start to get a little bit of a Mirror Finish with this stage, but not quite good enough for MIRROR FINISH POLISHING.

One of many Metal Polishing / Buffing Machines here at Mirror Finish Polishing

• SPECIAL BUFFING PHASE

Buffing Metal is not too difficult if you have the right tools and the right buffing wheels for the metal you are working with. Be sure to have a machine that can take a lot of stress and the metal will come out to a brilliant mirror finish once pressure is applied in a direction that will accent the metal. This Phase is the last phase for the Mirror Finish Polishing that if done correctly with the right polishing wheels for the right metal will come out to a Chrome - Like Mirror Finish. Once you are doing buffing the metal you will need to perform the cleanup phase which I will be writing about next time.

 

Mirror Finish Polishing goes to great lengths to make sure our Metal Polishing Processes are down to an art providing Chrome - Like Metal Polishing Service to Customer all over the world.

Just remember if you want to do a Quality Metal Polishing job than you will need to have a LOT of time set aside, many machines ready and a lot of experience. Here at Mirror Finish Polishing our staff on-hand have a combined experience of over 50 years in the Metal Working business and always maintain a very high level of quality in our Metal Polishing Standards.

BEFORE PHOTOGRAPH	AFTER PHOTOGRAPH

______________________________________________________________

 

Polishing Aluminum, Steel, Titanium or any other Metal off of a car, motorcycle or anything else is essentially a very delicate process since you can take a lot of metal off one of these parts in a very short amount of time which will make an irregular look in the metal if not careful, so very close attention to detail is essential in the aluminum polishing process of an Aluminum part.

 

Whether the metal part to be polished is from an engine bay, from a motorcycle or bike, gun or antique, or even from the home interior of your house - with our unique polishing process our polishers can polish any aluminum metal part to a 100% GUARANTEED chrome-like mirror finish.

 

Our metal parts polishing process makes it possible to match aluminum parts polishing to steel parts polishing, so both aluminum and steel parts will in fact shine to a mirror finish after our metal polishing process.

_______________________________________________________

 

Why Use Mirror Finish Polishing?
Very Affordable Polishing Service 100% Guaranteed Mirror Finish Polishing Service Chrome-Like Polishing of Titanium, Aluminum, Steel and other metals Quote Requests answered within 24 hr Centrally Located to help lower shipping costs Parts checked multiple times before shipment to ensure quality	Multi Part Discounts Available Unmatched Mirror Finish Chrome-Like Quality Polishing Finish Custom Grinding, Re-surfacing & Welding Available Fast & Friendly Service Well packed parts for US or International shipping Express Service available for your polishing order (fees apply)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Multi Part Discounts Available
• Unmatched Mirror Finish Chrome-Like Quality Polishing Finish
• Custom Grinding, Re-surfacing & Welding Available
• Fast & Friendly Service
• Well packed parts for US or International shipping
• Express Service available for your polishing order (fees apply)